1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

From DD-WRT to Tomato fram and back

Discussion in 'Tomato Firmware' started by kthaddock, Apr 3, 2011.

  1. kthaddock

    kthaddock Network Guru Member

    Hi all

    I'm coming from DD-WRT and thinking of to migrate to tomato. My thougt is to learn to flash to tomato and back again to DD-WRT without to brick. I have clicking around and can't find palce to read about to do that. Can you guys supply me links ?

    Regards
    kt_haddock
     
  2. TT76

    TT76 Networkin' Nut Member

  3. kthaddock

    kthaddock Network Guru Member

    I forget to say, I have asus RT-N16. Ugrade to tomato from dd-wrt web-gui and then Nvram reset. Then I wouldn't expect any problem with password trouble ?
     
  4. myersw

    myersw Network Guru Member

    I have a N16 and have flashed between Tomato and DD-WRT multiple times. With the Nvram reset, selected during the flash, you will have the default admin and password for which ever you are flashing.
    --bill
     
  5. TexasFlood

    TexasFlood Network Guru Member

    Check the official Tomato FAQ. I has some good guidance there, such as sections:
    - Installing from DD-WRT, HyperWRT, etc. firmware
    - Installing another firmware or restoring the original firmware
    - Why doesn't my password work?
    - Should I reset the configuration after installing Tomato?
     
  6. kthaddock

    kthaddock Network Guru Member

    Okey, from web-gui both ways. I think I try.....

    "tomato-K26USB-1.28.8903MIPSR2_RAF-VPN.trx"
    "tomato-K26USB-1.28.7460MIPSR2-Toastman-VPN"
    "tomato-K26USB-1.28.9054MIPSR2-beta-vpn3.6.trx"

    I can't choose between them, want that with most feature
    Tank you! I gone test within couple of days.

    I forget to ask: does this build contain PPTP-server ?

    kthaddock
     
  7. kthaddock

    kthaddock Network Guru Member

    I'm testing

    I get all my functions to working. Is it any build including PPTP-server ?
    I used: "tomato-K26USB-1.28.7462MIPSR2-Toastman-VPN" and seems to work good.
    Whare can I find any guid to setup openvpn server, client and how to generate key set to that ?

    Is there any example file or similar to VSFTPD to get it to work with basic setting ?

    Regards
    kthaddock
     

Share This Page