1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Front button on WRT54GS V2.0

Discussion in 'Cisco/Linksys Wireless Routers' started by Flyer007, Apr 14, 2005.

  1. Flyer007

    Flyer007 Network Guru Member

    I have a brand new WRT54GS V2.0 (per sticker on bottom)

    It has firmware 3.37.6 loaded and has been running fine.

    I have not been able to find out what the front button under the Cisco label is used for. Any ideas?

    Also is only hyperRT and mfg firmwares to be used with this right now?

    I have used Alchemy on my previous 54GS 1.0 and like the features. DDR looks interesting also and includes the xbox KAID functionality.

    Wish me luck on this one. I had a 1.1 that was have reboots with high traffic (LAN even)
  2. Guyfromhe

    Guyfromhe Network Guru Member

    i'n running wifibox on my v2.0 I didn't see any hidden button are you sure theres one there?
  3. Guyfromhe

    Guyfromhe Network Guru Member

    oops misread mine isn't a GS.
  4. jagboy

    jagboy Network Guru Member

    no body knows what the button does. it is said to be a easysetup button. or something. i thnk that linksys will do something wit it soon
  5. Guyfromhe

    Guyfromhe Network Guru Member

    i remember seeing a post somewhere about a button you can press on the router that somehow automatically sets up encryption on the ap and the computers without the user needing a clue, that might be what it's for (anyhoo thats my story and i'm sticking to it)
  6. Morpheus

    Morpheus Network Guru Member

    You press this button and you'r WRT54G/GS will BLOW up :wink: :wink: :lol:
  7. Guyfromhe

    Guyfromhe Network Guru Member

    damn wish mine had a button like that.
  8. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    It is for the new "SecureEasySetup" that Linksys was working on to allow simple connections for "novice" users. Anyone who has recently bought one of the new models will find the CD its shipped with has a util that prompts you through everything as well.

    Have a look at another example of how far Linksys is going to help home users configure their hardware. http://www.linksysfix.com/check/filter/index1.htm?CallerID=SP
  9. Avenger20

    Avenger20 Network Guru Member

    If you have a v1.1, you can easily solder a push button on it.
  10. jagboy

    jagboy Network Guru Member

    cool!! will the button do anything is for sho

Share This Page