FTP password problem on NSLU2 using R63

Discussion in 'Cisco/Linksys Network Storage Devices' started by d__l, Mar 23, 2007.

  1. d__l

    d__l Network Guru Member

    I've worked on this FTP password problem for quite a while without finding the solution and I wanted to check to see if other have or had a similar problem.

    When the NSLU2 with R63 is used with only a flash drive (FAT32 formatted) on USB port 2, FTP access to it works great using either guest/password or admin/admin which are the only two possibilities. If a ext3 formatted HD on USB port 1 is active, the only way I've found to get FTP access to the flash drive is by using a valid user account/password for the ext3 drive.

    If the guest/password is used, the FTP program accepts the "guest" ID, but then hangs until the program times out. Apparently the NSLU2 FTP server stalls when "guest" is sent to it. I think this is a bug! "Guest" should be a valid user ID and this should work. Note: If any invalid ID/password is sent, the NSLU2 promptly rejects it.

    I haven't been able to get the anonymous FTP setting to work at all. Another bug!

    This lack of guest/password access with the ext3 drive running posses a problem. I have a net cam that automatically and continuously FTP's snapshots to the thumb drive. Normally the ext3 drive is powered off, but I can remotely power it up for back up jobs. Once the ext3 drive is on, the net cam can't FTP snapshots to the thumb drive unless admin/admin (one of the two possibilities for FTPing without an ext3 drive) is the ID/password for the HD. The net cam can't switch between alternate ID/passwords to FTP its data to the NSLU2.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice