FTP problems with Satori-4.0 v2.07.1.7sv

Discussion in 'Sveasoft Firmware' started by Joris, Aug 2, 2004.

  1. Joris

    Joris Network Guru Member

    Hi,

    I have my WRT54G v2.0 with Firmware Version: Satori-4.0 v2.07.1.7sv
    connected to my eminent router with built in ADSL modem.

    Code:
    Internet ---- EMINENT +----- Server 1
                          +----- Server 2
                          |
                          +----- WRT54G +-------- PC 1
                                        +-------- PC 2
    
    
                               wireless +--------- laptops
    
    When I start an ftp-session from PC1(client) to Server1(ftp-server) and I try to GET
    a whole bunch of rars, I am unable to get all of them ... on a few I get errors like
    "425 Can't build data connection: Connection refused" though most files are transfered OK.

    When I try to GET the same files to Server2 (ftp-client) from Server1 (ftp-server) eberything works fine. Before I had the WRT54G, PC1 was conbnected to the Eminent router too and I never had such problems ....

    Anyone has a suggestion ???
     
  2. Joris

    Joris Network Guru Member

    I moved to Wifi-box.net Release Version: 2.02.2.1.wfb 01/02/2004
    and the problem seems to be gone ...
     
  3. pini

    pini Network Guru Member

    I guess it may be the loopback option trick again.
    Try disabling the loopback option on the administration page.

    _pini.
     
  4. Joris

    Joris Network Guru Member

    I'm 99% sure, the loopback option was disabled,
    maybe I'll flash Satori again, and make 100% it is disabled ...
    On the other hand, as long as I have no probs with the wifi-box
    firmwarem, there's no reason to flash it again ...
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice