1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

G2G VPN between two RV042 with one behind NAT

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Sfor, Aug 4, 2009.

  1. Sfor

    Sfor Network Guru Member

    I have no problems with connecting from an RV042 behind NAT to WRV200, thanks to the WRV200 NAT-Traversal function. But, somehow, I'm unable to do the same when trying to connect to another RV042.

    What particular tunnel settings I should try? Especialy, what security group settings should I use?
  2. Sfor

    Sfor Network Guru Member

    I was able to make the tunnel connect using the "Dynamic IP + Domain Name(FQDN) Autenthication" function for the NAT-ed router. Unfortunatelly, the connection does not seem to be working as it should to.

    When tried to do the same on another Internet line without NAT, everything was working correctly. So the tunnel settings seem to be correct. The problem is somehow related to the NAT without the IPSec passthrough, probably.
  3. Sfor

    Sfor Network Guru Member

    Loading the firmware to both routers fixed the problem. Apparently the firmware is buggy when it comes to the NAT traversal.

Share This Page