1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Getting to Modem's UI

Discussion in 'Cisco/Linksys Wireless Routers' started by texnnyc, Jul 15, 2012.

  1. texnnyc Reformed Router

    There is probably a way to do this with DD-WRT or Tomato, but is there any way to get to the modem's GUI when it is in transparent bridge mode? I tried setting a static route, but with my e4200 being the DHCP server and doing NAT, it doesn't like that option.

    I *can* get it if I plug the modem into a LAN port, but I basically lose internet if I do that.

    Thanks in advance!
    texnnyc, Jul 15, 2012
    #1

  2. Mangix Networkin' Nut

    typical IP for modems is 192.168.100.1 . I've had no problem accessing the modem interface even with a different subnet on dd-wrt(eg 192.168.1.xxx).
    Mangix, Jul 30, 2012
    #2

Share This Page