1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Getting Tomato on Asus WL500GPv2

Discussion in 'Tomato Firmware' started by seepage87, Jun 18, 2008.

  1. seepage87

    seepage87 Guest

    I know this is technically a linksys forum, but this seems to be one of the better resources on Tomato.

    Has anyone had any luck with the WL500GPv2? I got dd-wrt working, hoping I could upgrade from there (since I couldn't from the stock firmware), but every time it upgrades "successfully", the router isn't pingable. I've also tried upping the 1.19 tomato.trx using tftp with the same problem, and the asus recovery tool sucks and won't recognize the router's existence to up the firmware in the first place.

    I was hoping someone could point me in the right direction. I dual boot windows and linux, so I can work with either platform as necessary, and I'm comfortable using the command line. So... Any suggestions?
  2. LLigetfa

    LLigetfa LI Guru Member

    Did you try the _ND version?
  3. FRiC

    FRiC LI Guru Member

    I don't think the v2 is supported, but please do report back whether it works or not.
  4. LLigetfa

    LLigetfa LI Guru Member

    I asked Jon about the V2. I also asked if he knew how much RAM it has. This is what he said.
  5. a9988cd

    a9988cd LI Guru Member

    WL-500GP_V2 + TOMATO_ND 1.19 WORK FINE.

    I'm try flash Tomato_ND it's can be ,when the FLASH complete change NVRAM (nvram set vlan1ports="4 5").

Share This Page