1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help about RV042 linksys router?

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by deepdark, Jul 15, 2007.

  1. deepdark

    deepdark LI Guru Member

    SO i have a linksys RV042 dual WAN router and i have a two ISP which one have a Bridged mode via PPPOE and second one with Static route. here is the config:

    [​IMG]

    so when the PPPE is active the router must be in Gateway mode to share internet for other PC's in my network .... but wery offten this connection is going down and RV042 is switching the Static ISP which to work must be in ROUTER mode so i am making this Manualy from this menu:

    [​IMG]

    is there any way to make this automatic????



    thx
     
  2. deepdark

    deepdark LI Guru Member

    no replays ;( i need help guys come on please
     
  3. Toxic

    Toxic Administrator Staff Member

    replies will come when someone knows you exact requirements and when the user is online. the forums are community based, yet it is upto the individuals to speak out when they can. perhaps no one has your type of setup/model and the 6 Hour time frame you have allowed to get a response is inadaquate.

    if the connect drops off in PPPoE mode, what MTU setting do you have? have you tried lowering it? (no higher than 1492 for ADSL) and also lowering the keep alive interval period?

    can you keep the router in gateway mode and setup static routes for WAN2?
     
  4. deepdark

    deepdark LI Guru Member

    The WAN2 is already in static route but like you know the static route must be in router mode and the wan1 pppoe it should use gateway

    so is there any solution when router auto switchs from wan1 to wan2 to change the working mode automaticaly????
     
  5. vpnuser

    vpnuser LI Guru Member

    Why can't you have WAN2 in Gateway mode, like WAN1?
     
  6. deepdark

    deepdark LI Guru Member

    becouse he have a Static ip list With 64 Ip adresese POOL.
     
  7. vpnuser

    vpnuser LI Guru Member

    Can it be done with 1-to-1 NAT?
     
  8. deepdark

    deepdark LI Guru Member

    how and what is 1 to 1 nat ?
     
  9. vpnuser

    vpnuser LI Guru Member

    Here is a recap from Help page.

    One-to-One NAT

    One-to-One NAT creates a relationship which maps valid external addresses to internal addresses hidden by NAT. Machines with an internal address may be accessed at the corresponding external valid IP address.

    Creating this relationship between internal and external addresses is done by defining internal and external address ranges of equal length. Once that relationship is defined, the machine with the first internal address is accessible at the first IP address in the external address range, the second machine at the second external IP address, and so on.

    Consider a LAN for which the ISP has assigned the IP addresses range from 209.19.28.16 to 209.19.28.31, with 209.19.28.16 used as the RV082 WAN IP (NAT Public) Address. The address range of 192.168.168.1 to 192.168.168.255 is used for the machines on the LAN. Typically, only machines that have been designated as Public LAN Servers will be accessible from the Internet. However, with One-to-One NAT the machines with the internal IP addresses of 192.168.168.2 to 192.168.168.15 may be accessed at the corresponding external IP address.
     

Share This Page