Help! Help on WDS !!!

Discussion in 'Sveasoft Firmware' started by big_redfox, Jul 21, 2004.

  1. big_redfox

    big_redfox Network Guru Member

    I am trying to bridging two WRT54GS together and both are using the free Satori 4 firmware. I am all confused about setting up WDS to have the two router to talk to each other, especially reading the docs from Sveasoft! Here are my question:

    (1) I turned off firewall, etc. on both routers, and enter the MAC addr of the other router in the WDS screen. I uses the LAN setting next to the MAC addr entry. I also turn on Lazy WDS but disable the WDS Subnet. The Sveasoft doc also says I need to telnet to the routers and type "brctl addif br0 wds0.2", while someone else on the net says just reboot both routers. Which one is correct?

    (2) What do you do to bridge two WRT54G/S together?


  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice