[help] howto setup native ipv6 on tomato‏?

Discussion in 'Tomato Firmware' started by sh0cker54, May 14, 2014.

  1. sh0cker54

    sh0cker54 Reformed Router Member

    Hi everybody, I need help.
    I have the latest shibby Tomato Firmware 1.28.0000 MIPSR2-117 K26AC USB VPN-64K
    From my ISP I've got IPes for native IPv6 setting.
    settings are:

    My router IP: 2axx:49xx::1f:0:1/96
    ISP IP: 2axx:49xx::1f:0:2/96
    Subnet: 2axx:49xx:3::/64
    DNS: 2axx:49xx::f:0:6
    DNS: 2axx:49xx::10:0:17

    So please, could you tell me what & where exactly to put these settings in tomato,
    maybe you could quide me with ssh commands.
    I really don't know how to make it work
    thanks for your time
     
  2. Spyros

    Spyros LI Guru Member

    Basic->IPv6->Native IPv6 from ISP

    Assigned / Routed Prefix = ISP IP
    Router IPv6 Address = My router IP
    Prefix Length = 64
    Static DNS = DNS 1 + DNS 2

    Save, wait services to restart
     
  3. sh0cker54

    sh0cker54 Reformed Router Member

    thanks for your reply
    this is the first thing I tried
    but when you enter the Assigned / Routed Prefix = ISP IP
    ISP IP is reduced to a prefix and tomato automatically put another value in the Router IPv6 Address = My router IP

    so I can't put the real IP settings in theses boxes, those are converted and locked by tomato...
     
  4. EOC_Jason

    EOC_Jason Networkin' Nut Member

    Maybe try setting the nvram variable directly?
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice