1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help interconecting tunnels 16 remote befvp41, 1 central

Discussion in 'Networking Issues' started by sagomi, Sep 8, 2005.

  1. sagomi

    sagomi Guest


    1 central befvp41 v2 central office static ip
    LAN IP

    16 befvp41 v2 in remote offices dyn. ip

    remote offices connect to central hq with out problem
    central office can "see" any of the remote.
    remote CAN'T "see" each other
    i need tunnels to see each other
    what can i do?

    thanks for any help you can give me
    :sadbye: :sad:
  2. 4Access

    4Access Network Guru Member

    I see two possibilities.

    1. Use a service such as DynDNS so each remote office has a DNS host name that can be used for establishing VPN tunnels between them.

    2. Configure static routes on each of the remote office routers so that any traffic destined for another remote office gets sent through the VPN to the main office. (The router at the main office should then automatically pass the traffic along to desired office through the VPN tunnel it has established with that office.) Note that this will put a much greater load on the main router as well as use extra bandwidth.

Share This Page