1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HELP ME!! I DISABLED DHCP SERVER AND NOW I CAN'T GET ONLINE!

Discussion in 'Sveasoft Firmware' started by jasyn, Jul 19, 2004.

  1. jasyn

    jasyn Network Guru Member

    I have a Linksys WRT54G Router .. and by accident I clicked on Disable DHCP server kuz I thought it was something else. Now I can't access the router's settings page, and I can't get online when connected onto it. PLEASE SAY THIS IS FIXABLE!!! WHAT DO I DO??? :cry:
     
  2. euser4life

    euser4life Network Guru Member

    If you hold the reset button down for 5-10 seconds then all orginal settings will be restored, including DHCP....

    Regards,

    Euser4life
     
  3. Esquire

    Esquire Mesquire Staff Member Member

    or manually assign an IP and DNS addresses to your client's TCP/IP.
     
  4. Lumute

    Lumute Network Guru Member

    Just manually assign an IP to your computer, if you did not changed the IP of the linksys then you can use 192.168.1.50, subnet 255.255.255.0, then access the setup and enable DHCP, and finally configure your computer to automatically get IP again...
     
  5. port22

    port22 Network Guru Member

    Yea -- don't forget to put your default gateway as 192.168.1.1 or whatever you have your device set at.
     

Share This Page