1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help Me Pls!!!!!!!

Discussion in 'Tomato Firmware' started by vasiloui, Jun 9, 2008.

  1. vasiloui

    vasiloui Addicted to LI Member

    helloooo to all i have WRT54GSv6.0 and i have on it dd-wrt....i want to remove it and put tomato..........i try but i cant anyone can help me?
     
  2. i1135t

    i1135t Network Guru Member

    Sorry bud, tomato is only supported for v1-4 for the WRT54GS routers...
     
  3. vasiloui

    vasiloui Addicted to LI Member

    ok.....why until v4?just ask :confused:
     
  4. i1135t

    i1135t Network Guru Member

    I dunno, probably some hardware changes after v4 for that router model. You can read directly from Tomato's homepage and your model is not listed, if you don't believe me.

    http://www.polarcloud.com/tomato#readme
     
  5. Clovenhoof

    Clovenhoof Addicted to LI Member

    It is because Tomato is Linux-based firmware, but your WRT54GS v6 is VXWorks-based. With a tool (http://www.bitsum.com/openwiking/owbase/ow.asp?WRT54G5_CFE#h4) it can be prepared to run DD-Wrt, which is another Linux-based fw, however there is no possibility to run Tomato on it.
     

Share This Page