1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help needed vpn tunneling through multiple routers

Discussion in 'Networking Issues' started by seatofus, Sep 9, 2007.

  1. seatofus

    seatofus LI Guru Member

    Host side routers: WAN to linksys WRT54G firnware v8.00.0 to
    subnet LAN linksys rvs4000 firmware v10.11

    Client side router: Motorola vt2542 software version 11.4.1-r070201-1.3.2-r1

    Im using Linksys QuickVPN on the client side
    on the host side in the WRT54G I have a vpn 3389 port open pointing toward the appropriate LAN ip address/rvs4000..... and in the rsv4000 I have VPN Client Accounts active to accept my vpn client........ is this correct/should this work/what am I missing ?.........
     
  2. Witchaven

    Witchaven LI Guru Member

    Hi Seatofus,

    QuickVPN can use either port 443 or 60443 (I think it tries 443 first, if this fails it tries 60443), so you should forward both of these ports on the WRT54G to the IP address of the RVS4000.

    Regards,
    Dave
     

Share This Page