[Help Needed] Wireless Transfer Speed Very Slow

Discussion in 'Tomato Firmware' started by praga, Mar 21, 2010.

  1. praga

    praga Addicted to LI Member

    Im using Asus WL-520GU Wireless Router and Teddy Bear Mod as the firmware.
    When i transfer from a computer A( which is connected to the Router via ethernet port) to Computer B (which is connected to the router via Wireless 802.11b/g mode)
    my transfer speed is around 1.2 to 1.3mb per second, then i enbaled afterburned and after that im getting 1.8 to 1.9mb.
    My wireless computer says 54mbps and full strength signal as well
    Is this the normal speed of this router?
    If not what is the problem?
    Please help me
  2. mstombs

    mstombs Network Guru Member

    Check your units - 54 Mega bits per second is some theoretical signalling rate, you can only get 20-30 Mb/s data rate maximum with a single wireless user. That may appear as 2-3 Mega Bytes per second. (8 bits plus overhead per Byte).
  3. praga

    praga Addicted to LI Member

    ohh but im getting less than 2 megabyte per second any particular reason for that
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice