Help Needed with fwbuilder and talisman

Discussion in 'Sveasoft Firmware' started by thedogcow, Jun 23, 2005.

  1. thedogcow

    thedogcow Network Guru Member

    Hi there, not new to firewalls but new to the wonderful world of fwbuilder and talisman. I thought I had got the firewall policies correct and went and sent them to the router but alas, I cannot access the internet! I really cannot see what is wrong, some screenshots of the policies are below. The lan connection is just 192.168.1.0 255.255.255.0, the other computer names refer to static ips. Could some kind soul please help me sort this out? It would be much appreciated!

    thedogcow

    [img=http://img258.echo.cx/img258/6687/policy8hw.th.gif]

    [img=http://img258.echo.cx/img258/4779/other0zc.th.gif]
     
  2. thedogcow

    thedogcow Network Guru Member

    I read here that i need to add the following, how would i go about this in fwbuilder and what does it do?

    Code:
    iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice