1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help no connectivity after Thibor 11 firmware upgrade.

Discussion in 'HyperWRT Firmware' started by finderz, Dec 20, 2005.

  1. finderz

    finderz Network Guru Member

    After flashing to Linksys v4.70.6 firmware from dd-wrt v2.2 then i reset & upgrade to Thibor11 Firmware and reset to default everyting was ok except my sis's comp with WMP54GS couldnt connect to the router keeps getting limited or connectivity problems. Then i check my ip now the ip ends with a 135 instead of 1 which is the default. Btw i have a wrt54gs v1.1. :(
     
  2. finderz

    finderz Network Guru Member

    Hmm... seems to be the WMP54GS problems now that i recall after certain firmwares upgrade i get this problems. Gonna check it out.
     
  3. raistphrk

    raistphrk Network Guru Member

    The new Thibor uses a new DHCP server. I found on mine that, after upgrading, I had to wipe the nvram before things would work properly before my clients would lease an IP address. Record all the settings for your router, then erase nvram and reboot. After you are presented with a clean router, you shouldn't have any connectivity problems.
     
  4. finderz

    finderz Network Guru Member

     

Share This Page