1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help PLEASe

Discussion in 'Cisco/Linksys Wireless Routers' started by Simpliztik, Oct 24, 2006.

  1. Simpliztik

    Simpliztik LI Guru Member

    I just got my WRT54GL with Firmware Thibor15c ok well everything is working fine I got WPA security set up and I have QoS etc the main issue im having is with my wireless connection

    When I try to click on my connection it says its acquiring an ip address but it doesnt seem to connect at all when i tried to set up a static ip for it it says connect then 1 sec later disconnects.... I have DHCP enabled

    PLz help im new at this so if im missing any other info that may help please tell me thanks
     
  2. Toxic

    Toxic Administrator Staff Member

    on you wireless client PC what is the signal strength like?

    you may also want to read over this article.

    Wireless Signal Tweaking
     
  3. Simpliztik

    Simpliztik LI Guru Member

    the signal strength is excellent has all the bars...discs right away


    My wireless laptop is unable to connect to my wireless network anymore with or without security it would say acquiring ip addresss then it would sit there and time out. I really dont know what to do since I dont know what to look for in the router other then the fact im using a cable modem with DHCP enabled. O by the way its a tomato not a thibor15c anymore
     

Share This Page