1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help Shibby - Errors in mips2.extras for latest K26N build

Discussion in 'Tomato Firmware' started by Sean Rhodes, Aug 20, 2014.

  1. Sean Rhodes

    Sean Rhodes Networkin' Nut Member

    Hi Shibby,

    I have problems with the extras.mips2.tar.gz files located at http://tomato.groov.pl/download/K26RT-N/build5x-121-EN/extras.mips2.tar.gz.

    I have installed tomato-E4200USB-NVRAM60K-1.28.RT-N5x-MIPSR2-121-AIO.bin, which seems to be working OK, so I went to add the extras pack to install the airplay module, but the last 3 required modules will not load and I get the following error:
    Code:
    root@Tomato:/tmp# insmod /opt/extras/input-core
    insmod: can't insert '/opt/extras/input-core.ko': invalid module format
    root@Tomato:/tmp# insmod /opt/extras/hid
    insmod: can't insert '/opt/extras/hid.ko': invalid module format
    root@Tomato:/tmp# insmod /opt/extras/usbhid
    insmod: can't insert '/opt/extras/usbhid.ko': invalid module format
    Can you advise if these were tested, or have they just been carried forward from previous builds, just assuming they would work?

    Thanks in advance
     
  2. leandroong

    leandroong Addicted to LI Member

    extras has problem with AIO and some builds. input-core.ko can't be installed on AIO for sure but installable on other selectable FW. For instance, .....BTgui-VPN.trx will accept installation of input-core.ko.
     
  3. Sean Rhodes

    Sean Rhodes Networkin' Nut Member

    Thanks,

    I will try the E4200USB-NVRAM60K-1.28.RT-N5x-MIPSR2-121-VPN.bin version to see if I have better luck
     

Share This Page