[help] Wap54g Problem

Discussion in 'Other Linksys Equipment' started by DonaldDuck, Jan 11, 2008.

  1. DonaldDuck

    DonaldDuck LI Guru Member

    Hi @all

    I have a problem. I've got a Linksys WAP54G.

    I flashed the Firmware like MustDie, HiPower and the HyperWAP Firmware for testing. Current I use the DD-WRT Firmware. I think it's the best for me.

    Ok my problem is that my AP has a wrong MAC Adress. The wrong one is 00:90:4C:60:04:01

    I'm looking for help in the Internet. I know there is a command for change it. But it don't works for me. I can correct the MAC for LAN and WLAN but in the line WAN there is the wrong address.

    I don't know why?!

    Who can help me?
     
  2. DonaldDuck

    DonaldDuck LI Guru Member

    I made a reflash and now my AP is bricked. Who can help me to reflash this AP.

    I can't ping the AP.

    It is the WAP 54G V2.

    I tried the Screw Driver method, but I had no luck.

    Who can help me?
     
  3. aetos

    aetos LI Guru Member

  4. DonaldDuck

    DonaldDuck LI Guru Member

    Yea I know this link. I've tried this method. I called it "Screwdriver" method. But thx for your help.

    I think I build a JTag-cable and try a new flash procedure. I hope it works ;)
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice