1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help with access restricitions

Discussion in 'DD-WRT Firmware' started by dellsweig, Nov 18, 2005.

  1. dellsweig

    dellsweig Network Guru Member

    I need some help - I am sure this has been discussed many times.

    I have DD-WRT V23 11/16 running on a WRT54G V3.1 (not that it should matter)

    I want to setup a set of restricitions for a single IP address. This IP (192.168.1.86) connects to the AP via a WET11 wireless bridge.

    ! want the following:
    1) time restricition (internet off after 10P)
    2) service restrictions (aim, irc, msn) (24x7)
    3) specific port restrictions (24x7)
    4) specific URL restrictions (24x7)
    5) url keyword restrictions (24x7)

    I have built 3 filters, one a time based deny filter and 2 allow filters with the port and url restricitions.

    I applied these all to the single IP address.

    They do not seem to work. The PC has no problem reaching any of the url or keyword destinations and is uneffected by the port and L7 filters.

    Is there a specific order I need to apply these filters in or is there a better way to build this
     
  2. robmack

    robmack Network Guru Member

    Use FWbuilder

    Use FWbuilder to tailor your rulset. Your requirements are child's play to implement and manage with FWbuilder. http://www.fwbuilder.org/
     

Share This Page