1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with setup

Discussion in 'Networking Issues' started by sks1024, Jun 26, 2007.

  1. sks1024

    sks1024 Guest

    I have a wrv200 ipsec tunneled to a wrv54g. Works great.

    I can ping and get to all devices hung off of either of these devices with no problems from either location.

    I have connected the wrv200 to the rest of my network via a cisco 3550 switch. I can ping the rest of the network fine now as well.

    What I can't do is ping these other devices from the remote location.

    The only devices that will respond from the remote location whre the wrv54g is are the ones hung directly from the linksys wrv200.

    Any thoughts or suggestions.

    Thanks,
    Stan
     
  2. ifican

    ifican Network Guru Member

    Are the ip's of the devices hung off the 3550 in the same range? How is the port on the 3550 that connects to the wrv200 configured?
     

Share This Page