1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with Tofu 9 WDS

Discussion in 'HyperWRT Firmware' started by thor17, Nov 26, 2005.

  1. thor17

    thor17 Network Guru Member

    Here is my setup: both WRT54G are running tofu9

    cable modem--(ethernet)-->netgear router--(ethernet)-->
    WRT54G(1)<--WDS-->WRT54G(2)--(ethernet)-->wireless AP-->wireless clients

    I am not able to get WDS working. When I plug a wired client into the 1st WRT, I can access the internet. When I plug a wired client into WRT 2, I cannot access the internet and cannot ping the 1st WRT nor the netgear router. What should my settings look like? Here is what they are now:

    Netgear Router:
    DHCP enabled
    192.168.2.1
    Subnet: 255.255.255.0

    WRT54G(1)
    Basic Setup:
    Internet Connection: Disabled
    LAN IP: 192.168.2.52
    LAN Gateway: 192.168.2.1
    LAN DNS: 192.168.2.1
    LAN Subnet: 255.255.255.0

    Wireless:
    Wireless Mode: WDS
    Wireless Network Mode: Mixed
    Wireless Network Name (SSID): Test
    Wireless Channel: 1-2.412 GHz
    Wireless SSID Broadcast: Enabled
    Bridge Restrict: Disabled

    WRT54G (2)
    Basic Setup:
    Internet Connection: Disabled
    LAN IP: 192.168.2.53
    LAN Gateway: 192.168.2.1 have also tried 192.168.2.52
    LAN DNS: 192.168.2.1 have also tried 192.168.2.52
    LAN Subnet: 255.255.255.0

    Wireless:
    Wireless Mode: WDS
    Wireless Network Mode: Mixed
    Wireless Network Name (SSID): Test
    Wireless Channel: 1-2.412 GHz
    Wireless SSID Broadcast: Enabled
    Bridge Restrict: Disabled

    All other settings are default.

    Can someone tell me what I am doing wrong? I've tried all the other modes (WET, WDS-AP, etc.) and also other Wireless Network Modes. I've also tried using "Automatic Configuration - DHCP" for Internet Connection on bothe WRTs. What settings do I need to get this working?
     
  2. thor17

    thor17 Network Guru Member

    Anyone get WDS working with Tofu 9?

    What settings are you using?
     

Share This Page