1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help!,WRT54G Update ok,but can not access it!

Discussion in 'DD-WRT Firmware' started by eztor, Nov 5, 2006.

  1. eztor

    eztor LI Guru Member

    I have a linksys WRT54G V4.
    I download the source code and build it.Then I got a image file.
    I update from web successful.
    the route reboot long time and power led sparkling.
    I ping 192.168.1.1 not response.
    I seach this problem and :
    1.use tfp 192.168.1.1 -c put dd-wrt.v23_wrt54g.bin command at plug power on,try again and again but not success.
    2.I ping 192.168.1.1 at plug power on,but not apear response at boot.
    3.I open the box ,try short the pins,but I not find any pin at borad.
    Who can help me?
    Thanks very mach.
    Tony
    Tony@eztor.com
     
  2. nullend_void

    nullend_void LI Guru Member

    Try to reset the router or do a hard reset by pressing the reset button for 30 seconds.
     
  3. eztor

    eztor LI Guru Member

    I try it but not resolve.I think my image is not correct.Maybe clean flash have some help.But the board can not find any pins.
     
  4. eztor

    eztor LI Guru Member

    who can help me?thanks...

    Nobody can really help me?Depressed ...
     
  5. djtazie

    djtazie Guest

Share This Page