1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help WRT54G V2 used to WDS in Saori 4.0 free

Discussion in 'Sveasoft Firmware' started by chenmu, Oct 12, 2004.

  1. chenmu

    chenmu Network Guru Member

    I had readed more papers and replays .but I can get it .
    My way is :

    DNS(DHCP)--cate5--WRT54G #1( enternet port , wan port not use) ---wireless--WRT54G #2 ( enternet port , wan port not use)---- notebook wireless card

    Setting :

    WRT54G #1 ap WRT54G#2 clinet
    ip 10.115.9.151 ip 10.115.9.152
    getway 10.115.236.51 getway 10.115.9.151
    lan mac 00000001 lan mac 00000002

    My problem is notebook wireless card not ping or connect to WRT54G #2,
    but can connect to WRT54G #1.

    Both WRT54G can find each RSSI value at there wireless status.

    Any one can help me!
     
  2. Toxic

    Toxic Administrator Staff Member

    replied via email...
     
  3. chenmu

    chenmu Network Guru Member

    Thanks for your WDS SETUP files.
    But I had tested by it and stepped by tesp that got failure before your mail.
    And this file let 2 WRT54G as ap , not a ap and a cllent , can not success.

    Can help me again ?
     
  4. Toxic

    Toxic Administrator Staff Member

    sorry i dont have wds setup here. maybe someone else could help?
     
  5. chenmu

    chenmu Network Guru Member

    As I do and test, Alchemy pre v5.3 can get right to WDS ,but Satori 4.0 free failure.

    Other , I try WRT54G #2 at lan port which can not ping to WRT54G #1,but notebook wrieless card can form #2 to #1 and connet to DNS.

    Why #2 lan port can not connet to #1 ?

    Any one can help me!
     

Share This Page