1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help:WRT54GV2 Wireless side seems dead

Discussion in 'Cisco/Linksys Wireless Routers' started by MegaByteNL, Jul 24, 2005.

  1. MegaByteNL

    MegaByteNL Network Guru Member

    This morning the wireless part of my WRT seems dead. I have tried a hard
    reset, several reboots but no response. When the router reboots the SSID is send for a few seconds and then it stops. The WLAN LED is on constantly.

    The LAN-side is still working. I appreciate all suggestions that could help me solve the problem.

    I'm using HyperWRT 2.1b1.


    I have been trying a little bit more. When the wireless channel is set to 6 or higher everything works. Channels 1 to 5; wireless is dead.


    Thanks in advance


    MegaByte [NL]

Share This Page