1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How can I change the time in the router?

Discussion in 'General Discussion' started by TheBuzzer, Sep 24, 2004.

  1. TheBuzzer

    TheBuzzer Network Guru Member

    Hi. I realized the time in my router is not correct.

    I am using the SVEASOFT firmware and i set it to -8:00 gmt time zone
    I realized after missing with the restrictions and stuff that the time is not correct.

    I am wondering is there a way to change the routher time so it have the correct time.
  2. MegaByteNL

    MegaByteNL Network Guru Member

    You can use the "NTP Client" option. You can find this option within the " "Administration" section of the router configuration.

    With the following link you can find an NTP server in your part of the world.


    Enter the IP-address of the NTP server you would like to use and enable the option.

    You might need to reboot the router by disconnecting the power for about 5 seconds.

    Good luck :)
  3. TheBuzzer

    TheBuzzer Network Guru Member

    thx it works but, the access restrictions seems to be miss up.

    it does not auto enable and disable at the time

    i have to resave the setting at the time to make it enable or disable

Share This Page