1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How can I connect iPhone to WRV54G?

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by DSoden, Aug 29, 2008.

  1. DSoden

    DSoden Network Guru Member

    The the setup has been working fine for years with QuickVPN but I can't figure out how to connect to it with an iPhone. Any ideas? I've found some info that indicated that the VPN should be set for 3DES and SHA1 but beyond that I've found nothing.
     
  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    Are you saying the your iphone has vpn capabilities? If that is the case, then you'll need to configure "one" of the 50 vpn tunnels available on the router. If you're not sure how to configure vpn tunnels on the wrv54g, take a look in the downloads section and there should be some video tutorials illustrating how to do it.

    Jay
     
  3. DSoden

    DSoden Network Guru Member

    Yes, the iPhone has VPN capabilities but it doesn't have a lot of settings so I can't figure out what the VPN settings need to be to match the WRV. I can choose L2TP, PPTP, or Cicso IPSec.

    For example, if I choose L2TP, then my options in the iPhone are:

    Description
    Server
    Account
    RSA on or off
    Password entry shows if RSA off
    Secret
    Send All Traffic on or off

    I don't know how to match up these settings with the tunnel settings on the WRV other then something I found that said it needs to be 3DES and SHA1. I've done a lot of experimenting but haven't gotten it right yet....

    If I choose PPTP the my settings are:

    Description
    Server
    Account
    RSA on or off
    Password entry shows if RSA off
    Encryption Level auto, maximun, or none
    Send All Traffic on or off

    Cisco IPSec options:

    Description
    Server
    Account
    Password
    Use Certificate, greyed out
    Group Name
    Secret
     

Share This Page