How do I change dropbear config to add -a?

Discussion in 'Tomato Firmware' started by joshhighley, Nov 20, 2009.

  1. joshhighley

    joshhighley Guest

    I want to enable remote port fowarding (ssh -R), but dropbear isn't starting with the -a option. I've searched the threads here, and some people say their instance of dropbear *is* starting with the -a option -- how do I make this happen? I'm running Tomato 1.25 on WRT54GL.
  2. mstombs

    mstombs Network Guru Member

    In teddy_bear's mod at least, there is an extra tick box to enable "remote forwarding". You could run dropbear manually from one of the scripts, but may also need to write custom firewall commands to allow remote access.
  3. Planiwa

    Planiwa Network Guru Member

    Wouldn't you just kill the old one and start a new one with the desired parameters?

    (I would probably not do this remotely, and would probably not automate it before testing it interactively. Might even fire up telnetd first, just in case. :))

    (Oh, BTW, "init --help" is less helpful than you might expect. :()

    Oh, Yeah, Victek's mod has a "Remote Forwading" Box too. :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice