1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How I can configure 3 computers for internet access?

Discussion in 'HyperWRT Firmware' started by Rudi1, May 5, 2006.

  1. Rudi1

    Rudi1 Network Guru Member


    Now I need some help from you guys!Today I just get another computer in my house for my second doughter and now I have 3 computer connected to the net with Linksys WRT54G router,Thibor 15 firmware and pppoe adsl access.The problem is becuouse I have 2 computer connected to router wireless and the last one by wire and this last one eat internet connections,so the other 2 computer have a really slow speed.Can someone suggest me how I can set all computer and router to have the best posible internet speed and with no trouble with connections.
  2. lwf-

    lwf- Network Guru Member

    The best way would probably be to get rid of the actual source of the problem. Why does the computer eat up all the bandwidth? Perhaps heavily usage of BitTorrent or similar? If that’s the case; put a speed limit on it, which should always be done no matter how many computers you have connected.
  3. Rudi1

    Rudi1 Network Guru Member

    yes,you are right about that.Sorry for newbie guestion,but I never done this before.How I can set speed limit,only for trouble computer or for all and what kind is procedure?

    thanx a lot for your help!
  4. Toxic

    Toxic Administrator Staff Member

    use the QoS services to lower the priority of the PC connected to the LAN port.
  5. Rudi1

    Rudi1 Network Guru Member

    Thank you Toxic for suggestion!Now I'am set this options to work just fine.
    Thanx for help and Thibor for his great firmware! :cheering:


Share This Page