1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to attach RVS4000 and Zyxel DSL modem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by xmnj, Jul 7, 2007.

  1. xmnj

    xmnj LI Guru Member

    Tried searching with no luck.
    I need help setting up a RVS4000 that will be hanging off a Zyxel DSL router/modem. I understand about fowarding the ports but not sure how connect the RVS4000. I'm thinking one of the Ethernet ports on the Zyxel should plug into the RVS Internet port and assign a static IP to the RVS and disable DHCP on the unit.

    Any ideas?

    Thanks in advance
     
  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    You need to put the zxell in bridge mode first. I helped someone do this about a year ago. The problem is the zyxell didn't put the instructions in the manual on how to do this with certain models (I got this information directly from the zyxell technican who was a "real" technician and not a "tier 1" drone).

    If you don't see how to bridge the zyxell in the current manual, you'll have to call tech support.

    Jay
     

Share This Page