1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how to config static route with remote vpn site?

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by somjuk, Oct 19, 2006.

  1. somjuk

    somjuk Network Guru Member

    http://upfile.us/z2z/linksys_vpn.png

    how to add network 192.168.1.0/24 and 192.168.2.0/24 to RV082 via vpn tunnel?


    and howto enable nat on RV016 for 192.168.1 and 192.168.2 network?



    thank for all.
     
  2. pablito

    pablito Network Guru Member

    Without doing some NAT tricks you normally can't static route subnets over VPNs that don't have that subnet included in the config (that keeps the VPN secure). You would typically create a second VPN that has the 2nd subnet configured. That is the normal way but I've found that the RVx can be difficult to do that depending on the config you require. Another way is to designate a subnet config on a single VPN that will include both desired subnets.
     

Share This Page