1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to configure WRT54G for do work Firewall Builder

Discussion in 'Sveasoft Firmware' started by alvarito, Jun 1, 2005.

  1. alvarito

    alvarito Network Guru Member

    Any guide to configure WRT54G and Firewall Builder for make WRT54G's Firewall's rules with Firewall Builder??
    Thank's ;-)

    P.D.:Sorry for my poor english
     
  2. c1623

    c1623 Network Guru Member

    Using Firewall Builder on a Linksys WRT54G/S

    Here is a good demo for configuring FW Builder so you can control the fire wall aspects of the Linksys WRT54G/S router. I have used this and it works a treat.
    Make sure you are running a version of the SVEASOFT firmware (I only say this because thats all I have tested it on)
    Also when it gives you the option for a firewall template number two seems to be the most relevant for a standard broadband config where you are running DHCP client on the WAN port (the one connecting to your ISP cable modem or whatever) and DHCP server for the internal four ports.
    Have fun

    http://www.fwbuilder.org/archives/cat_slides.html#000157
     
  3. alvarito

    alvarito Network Guru Member

    Thank's c1623.
     

Share This Page