1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to refer client to a pxe server with Tomato act as a DHCP server?

Discussion in 'Tomato Firmware' started by kenyloveg, May 7, 2009.

  1. kenyloveg

    kenyloveg LI Guru Member

    Hi, All
    I'm owning a NAS(DNS-323) in my network, and Tomato as a DHCP server.
    Now i want to setup dns-323 as a tftp->pxe server, so client can boot from DNS-323.
    fun_plug on DNS-323 is enabled, also dnsmasq is installed.
    My question is how to config dnsmasq on Tomato, so that client would know where is pxe server. Or it'll be great if udhcpc can do the same thing.
    Thanks and have a good day.
  2. nobugme

    nobugme Network Guru Registered



    configure it under Advanced/DHCP/DNS/Dnsmasq Custom Configuration.
    darkknight93 likes this.

Share This Page