1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to VPN to a Linksys RV042 with working mode: Gateway

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by jimeu, Mar 20, 2008.

  1. jimeu

    jimeu Guest

    I am having this issue with a linksys RV042 that I can't VPN to it.
    Also, I am not able to Ping the unit from outsite my LAN.
    All of the previous with the unit set up as Setup - > Advanced Routing - > Working Mode set to Gateway.

    If I change the working mode to "Router" I am able to ping and connect to the VPN, but I loose the internet connection on the LAN.

    basically I can't have one or the other, I need both, vpn access and also that the lan gets load balance internet.

    I don't have any other routers on my LAN, one DSL connected to WAN1, and a Wi-fi ISP provided to WAN2 to the RV042, no DMZ host, and a connection to a linksys 16-port workgroup switch

    So the question is how can I get ping and access to the VPN if on working mode "Gateway".
    or how can I get internet access if the RV042 on working mode "Router"

    RV042 is on the lates 1.3.9 version

    Jimeu
     

Share This Page