1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

howto tinyPEAP dummy

Discussion in 'TinyPEAP Firmware' started by aaaaaaa, Apr 17, 2005.

  1. aaaaaaa

    aaaaaaa Network Guru Member

    Im using tinypeap 2.13 WRT54G v2.0.
    Im never got tinypeap work.
    i go to wireless>tinyPeap and add username and password.
    Then wireless>security and put security mode WPA RADIUS. Radius server 192.168.1.254, shared key "password" also tried to put radius server 192.168.1.1.

    Now when i want to connect with wifi then it ask only wpa key. But i want that it ask username and password.

    What i do wrong?
     
  2. tinyPEAP

    tinyPEAP Network Guru Member

    Hi,

    Try generating CA/tinyPEAP cert from tinyPEAP configuration page.
    This does NOT mean that you need to set the 'validate server' option on the
    client side (though recommended), but it should get your device going anyways.

    -tak
    tinyPEAP Developing Team
     
  3. aaaaaaa

    aaaaaaa Network Guru Member

    just doesnt work nothing.
    I just want that if i connect wifi then i asked password and username.
    What i must to?
     
  4. tinyPEAP

    tinyPEAP Network Guru Member

    Would you provide us with little bit more details in your setup?

    -OS for your clients
    -version of WRT54G

    Try 'factor default' reset, then tell us the exact step you have taken in the process.

    -tak
    tinyPEAP Development Team
     
  5. aaaaaaa

    aaaaaaa Network Guru Member

    Client OS is Win XP PRO SP2.
    WRT54G v2.0
    First i go Wireless>tinyPeap add username and password.
    Then wireless>security and put security mode WPA RADIUS. Radius server 192.168.1.1, shared key "password".
     
  6. tinyPEAP

    tinyPEAP Network Guru Member

    Have you tried generating the CA/PEAP cert key pairs?
    From version 2.0, we've made this process mandatory.
     
  7. buddyclub

    buddyclub Network Guru Member

    Cannot get WRT54GSv4 with firmware v1.05.2 TinyPeap to work

    I have bought a Linksys AP model WRT54GSV4 with firmware v1.05.2 specifically to get TinyPeapto work. I have downloaded the tinypeap v2.13 gs and followed the directions to upload it to the AP and it keeps giving the "Wrong Code Pattern" error. I have tried tftp or web.
    What am I doing wrong or is my version in-compatible with TinyPeap.

    Thank you for your help.
     
  8. herdwick

    herdwick Network Guru Member

    I got the "Wrong Code Pattern" error when I accidentally tried to use the GS code on a G router. Maybe double check the versions and compatibiltiy ?

    Phil
     
  9. Ghost620

    Ghost620 Guest

    I had a v4, "downgraded" to dd-wrt successfully.... then tried upgrading to Tinypeap using tftp.... You can try it too if you want a brick/paperweight......
     

Share This Page