1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HTML control panel pages unreadable.

Discussion in 'Cisco/Linksys Wireless Routers' started by ][amid, Sep 22, 2006.

  1. ][amid

    ][amid Guest

    Hello,

    I hope someone can point me in the right direction.
    My WRT54G v1 router, shows me html pages with no text.

    Due to this I can't navigate, nor can I change any settings.
    Above all, I can't even update to a later version.

    what do I do?:confused:

    see screenshot -> [​IMG]
     
  2. kingvj

    kingvj Network Guru Member

    Hard-reset the router by holding the reset button for about 45-60 seconds. Check with a different browser, PC. The one you have, going by your screenshot is a WRT54G v5. The latest f/w is 1.00.9 which is a bin file. Download the tftp file from ftp.linksys.com/pub/network/tftp.exe

    Run the tftp.exe, type the username/password for the router in the Servername/password file and select the bin file. Then go for the upgrade. Repeat steps mentioned above to find the solution..!!
     

Share This Page