1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HyperWAP 2.08 when?

Discussion in 'HyperWAP Firmware' started by python, May 2, 2005.

  1. python

    python Network Guru Member

    Linksys already release the source code for the WAP 208 firmware. When we should see a new version of HyperWAP?

    I know that the 2.08 firmware from linksys have a better driver for the broadcomm wirelless chip that´s inside the WAP54G. I´m getting more bandwidth and better signal.
     
  2. Avenger20

    Avenger20 Network Guru Member

    Problem is my development computer completely crashed yesterday.
    If I can find the time to reinstall everything, maybe within a few weeks, otherwise around July.
     
  3. Toxic

    Toxic Administrator Staff Member

    so to hear that, hope it is not serious...
     
  4. Avenger20

    Avenger20 Network Guru Member

    Probably just a new hard disk. Lost however all the work I did the last days on HyperWRT and part of the DD-WRT translation. The modern hard disks are not anymore what they used to be ;)
     
  5. Morpheus

    Morpheus Network Guru Member

    True true
     
  6. python

    python Network Guru Member

    I only trust in seagate hard disks.
    But you have to be prepared for everything.

    Quantum used to build nice hard disks but some models before maxtor bought it sucked pretty bad.

    You know that Seagate is the only company that complieas to ALL the specifications that the IDE standards require.
     
  7. Avenger20

    Avenger20 Network Guru Member

    No seagate hard disks here anymore ;) I must have had about 5 seagate hard drives (going from 10GB to 60GB) and they all died. The one that crashed now was from IBM and was ticking a lot. I should have known.

    The hard drive from my first 286 laptop is great. It's almost as old as me and still running ;) Unfortunately you can't compile firmware on it...
     
  8. robpoe

    robpoe Network Guru Member

    Must have been an IBM DeathStar (err, DeskStar)
     
  9. jagboy

    jagboy Network Guru Member

    i have a compaq 1400 from 1995 that was my first computer. that would mean i was only 5 years old. i am 15 now.

    and computer is a 16mb ram 500mhz cpu. heck my wrt54gv2.2 sounds better than this :D . but when we got it it was fast. i ripped the mdd which was only 1.5gb and stuck it in the computer i am using now. rightnow i am running
    dell 2300 2.0ghz 640mgs of ram 80gig hdd, hdd 2 2gb 42x dvd player & 48xcdrw 128mb nvidia geforce mx 4000>harman kardon 2.1 surrond sound

    not bad for a 15 year old :D i love the nvidea graphics card it was hard to install
     
  10. Ofloo

    Ofloo Network Guru Member

    or is it released already..
     
  11. bigjohns

    bigjohns Network Guru Member

    This is so true. I used to have to choose between MFM or RLL formatted drives, and a 5mb disk - the size of a shoebox in it's external case - cost over $300.
     
  12. Ofloo

    Ofloo Network Guru Member

    how do you interface it ??
     

Share This Page