1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HyperWRT 2.0b3 is out!

Discussion in 'HyperWRT Firmware' started by Avenger20, Nov 18, 2004.

Thread Status:
Not open for further replies.
  1. Avenger20

    Avenger20 Network Guru Member

    Here it is, HyperWRT 2.0b3 :D

    Changes in 2.0b3 :

    * Possibility to select Manual Transmit Power in mW
    * More Access Restrictions Policies & Blocked Services Fields
    * Telnet Daemon
    * Reboot Button

    The GS firmware is based on the new Linksys 3.37.2 firmware

    Download HyperWRT at http://www.hyperdrive.be/hyperwrt/

    Have fun!

    PS : Simon, could you make a mirror? (lost your email again :? )
     
  2. JetLi

    JetLi Network Guru Member

    Hi
    thnx, i wil try it.

    MvG
    JetLi
     
  3. dellsweig

    dellsweig Network Guru Member

    Avenger (Can we use first names yet )

    THANKS for the work

    I just flashed it in (wirelessly - of course).

    The web interface seems quicker. I love having telnet - I have not tried it yet but I hope it is only serviced from the LAN side as there is no password prompt....

    Thanks for putting the reboot button in and putting the UpTime and CPU info back in!!

    WHAT ELSE is in this release??

    Dan
    --
     
  4. CameraAssistant

    CameraAssistant Network Guru Member

    Works perfectly ith my GS and Vonage !
     
  5. Pistolero

    Pistolero Network Guru Member

    AWESOME!!!

    Thank you Avenger!

    2 q's:

    Will the WallWatcher script work on this version as well (without resetting the router to defaults every 12 hours or so)?

    and, is there a way to start the telnet daemon automagically upon router reload?

    Thankee Sai, Gunslinger. You have NOT forgotten the face of your father and your aim is true.

    Pistolero.
     
  6. Avenger20

    Avenger20 Network Guru Member

    Re: AWESOME!!!

    See the sticky for WallWatcher. Would not autostart telnet, only use it when you need it, but if you really want to, you could place it into startup (/sbin/telnetd -l /bin/sh)
     
  7. Green

    Green Network Guru Member

    upgrade procedure

    Hello!
    should I reset to factory defaults after upgrading from b2 to b3?

    Thanks
     
  8. Avenger20

    Avenger20 Network Guru Member

    Re: upgrade procedure

    It's always a cleaner way to do this, but it's not necessary.
     
  9. Green

    Green Network Guru Member

    Re: upgrade procedure

    Last question - is it ok to reset to factory first and then restore config from backup?
     
  10. Avenger20

    Avenger20 Network Guru Member

    Re: upgrade procedure

    No, restoring a backup will undo the reset to defaults and is dangerous as well. It's better to just flash the firmware and not restore to defaults then.
     
  11. Mediator

    Mediator Guest

    Web Page Download error:

    Warning: Smarty error: unable to read resource: "db:downloads" in /home/hyperdri/public_html/hyperwrt/smarty/Smarty.class.php on line 1084
     
  12. dellsweig

    dellsweig Network Guru Member

  13. gmartin

    gmartin Network Guru Member

    Parental Control

    Dear Mr Avenger,

    Can you verify whether parental control in the wrt54gs is supported in hyperwrt?

    Thanks

    \\Greg
     
Thread Status:
Not open for further replies.

Share This Page