1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HyperWRT 2.0b4 released

Discussion in 'HyperWRT Firmware' started by Avenger20, Jan 8, 2005.

Thread Status:
Not open for further replies.
  1. Avenger20

    Avenger20 Network Guru Member

    The update you all have been waiting for, HyperWRT 2.0b4 :)

    Changes in 2.0b4 :

    * Increased maximum concurrent connections from 1024 to 4096
    * TCP Timeout has been optimized
    * Minor bugfixes and enhancements

    These fixes should give better performance when you are running P2P programs (like bittorrent), which open up a lot of connections.

    You can download HyperWRT at http://www.hyperdrive.be/hyperwrt/

    Have fun!
  2. ermynn

    ermynn Network Guru Member

    Thank's for your great job

    J test it immediatly

  3. Morpheus

    Morpheus Network Guru Member

    thanks :wink:
  4. JetLi

    JetLi Network Guru Member

    Thnx, ik doe nu proberen. :lol:

    met vriendlijken Groeten
  5. blueICE

    blueICE Network Guru Member

    Thanks! :D
  6. fatoil

    fatoil Network Guru Member

    Thanks a lot!!! :) :)
  7. fabjan

    fabjan Network Guru Member

    Thanks for your great work.

    I've just installed it over 1.2b3, no problem, even keep all the setting.

  8. Morpheus

    Morpheus Network Guru Member

    I recommend you do a reset
  9. ravn

    ravn Network Guru Member

    What about the Configuration restore/save feature? Can save my settings from 1.2b3, flash with 1.2b4 and restore it?
    Just asking 'cause I read the warnings about it....
  10. Avenger20

    Avenger20 Network Guru Member

    If you don't want to retype everything, just don't do a reset. It will just run fine. However, when switching from different firmware (sveasoft or wifibox), a reset to defaults is highly recommended.
  11. snowpeas

    snowpeas Network Guru Member

    thanks avenger, im gonna try it w/ bt see if it crashes :)
  12. Green

    Green Network Guru Member

    some pages are broken as it was before -,
    Checked with different encoding settings in IE.
  13. Avenger20

    Avenger20 Network Guru Member

    Nothing wrong here. Tested both in IE and FireFox. Maybe try a refresh (F5)?
  14. Scotto

    Scotto Network Guru Member

    No problems here with my WRT 54G v.2
  15. ravn

    ravn Network Guru Member

    All the pages works perfect here.... Already loves this firmware, only thing that I try not to miss is the static DHCP, but I cant seems to get the Client Lease Time to work. When I try to set it to several days, it still shows up as only one day, when I do a ipconfig /all on the clients...?
  16. Green

    Green Network Guru Member

  17. Avenger20

    Avenger20 Network Guru Member

    This will probably be the same in the official firmware.
    Maybe there are too much toolbars in IE, or you screen resolution is too high.
  18. madhatter

    madhatter Network Guru Member

    read somewhere about a "bug / undocumented feature" in the linksys firmware that allows static ip for your pc just set the ip to static on the network properties and make sure that is below the dhcp start ip's.

    I have my main pc set up with static ip= and the rest are set via dhcp from the WRT54G. Have been running like this since i found out 6 weeks ago with no problems.
  19. Toxic

    Toxic Administrator Staff Member

    if it works fine in one OS and doesn't in the other then I suggest there is nothing wrong with the firmware just your browser.

    others have already confirmed it works for them.
  20. Gary

    Gary Network Guru Member

    ok...i installed this firmware....i disconnected all other cpu's from the router hooked up my laptop too it and upgraded the firmware ( i have the wrt54gs) however now when i try to go and change my settings it lets me log in using my pword..but when trying to save differen't settings it doesn't work it says it cannot connect to the router ip ( whats going on here?
  21. bricamac

    bricamac Guest


    Thanks a lot this very good firmware.
  22. Green

    Green Network Guru Member

    Ok, changed to 800x600x16 and removed toolbars. No change :roll:

    Anyway, it's just a cosmetic problem.
  23. Gary

    Gary Network Guru Member

    cud anyone help me out?
  24. Ouaibe

    Ouaibe Network Guru Member

    Thks Avenger for this great update!
  25. jlw

    jlw Network Guru Member

    works great!
    I did of misstage flash into the offical firmware first. Could fnd the reboot router button. ;-)

    But this firmware realy rocks! But a few more advanced features whould be nice.
  26. psyxakias

    psyxakias Network Guru Member

    Hello everyone,

    I recently upgraded the firmware of my Linksys WRT54GS router:
    HyperWRT v1.4 (based on Linksys v2.09.1) -> HyperWRT 2.0b4 (based on Linksys v3.37.2)

    The most impressing things I've noticed, further than the new/improved features are:

    1) I succeed to cover places at my home with just 10 mW, while in past I needed >50 mW
    2) In past, whenever my laptop (with Linksys WPC54GS) was far away from the router, it was taking time (at least 3-5 attempts) to connect to the router while now it connects immediatelly with just a single attempt

    Special Thanks to Avenger and Linksys

    PS: In past, I had created a thread with many requests/suggestions but I hadn't realized that Avenger wanted to keep his firmware hacks close to the original firmware. I apologize for asking all these things.
Thread Status:
Not open for further replies.

Share This Page