I am realy try but something wrong (vlan config)

Discussion in 'DD-WRT Firmware' started by alaite, Mar 19, 2007.

  1. alaite

    alaite Guest

    Hi,
    I am new and have no expierence. I was read some treads and trying to configure my WRT54GL v.1.1 with dd-wrt v23 sp2 to switch port 4 as vlan2.
    I want the ports 1,2,3 from vlan0 can access port 4 on the vlan2 and internet. Vlan2 can access vlan0 and internet. Vlan0 have DHCP and vlan2 do not have DHCP.
    Result of my experiment was total disaster - no internet on vlan0 and vlan2. No communication between vlan0 and vlan2. :confused:

    Can somebody help me with setup?

    My code:

    nvram set vlan0ports="1 2 3 5*"
    nvram set vlan2hwname=et0
    nvram set vlan2ports="4 5"
    nvram set rc_startup="ifconfig vlan2 10.0.0.1 netmask 255.255.255.0"
    nvram set rc_firewall="iptables -I INPUT 2 -i vlan1 -o vlan2 -j ACCEPT"
    nvram commit
    reboot

    Regards,

    Alex
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice