1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I want real router firmware

Discussion in 'General Discussion' started by dslrgm, Nov 20, 2007.

  1. dslrgm

    dslrgm Network Guru Member

    I have a WRT54Gv3.

    I am using sveasoft on it, v1.2.7.

    I have tried to figure out what other porjects have to provide, and have decided that I just as well ask.....

    I don't want fancy NATing and DMZs. I just want to define the address ranges on the interfaces and expect static routing to work. In one port and out another. Wired LAN and Wireless as separate subnets is nice, as is VLAN support, but then you should be routing between the VLANs. Oh, and the WAN interface is just plain ethernet.

    Nice support for IPtables for any firewalling would be nice. And a web interface for managing the firmware.

    thanks. I am JUST about ready to pull an old HP router with firmware from back in '96 out of the bin to use already.

Share This Page