1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

If I were to buy a WRT54G right know...

Discussion in 'Cisco/Linksys Wireless Routers' started by dsheli, Jul 22, 2004.

  1. dsheli

    dsheli Network Guru Member

    Hello,
    I have a couple of questions to ask. Since there are many versions of the WRT54G are any of the new routers not hack able? Since they have new firmware that has fixed the whole can you just downgrade the firmware to the version with the hole? Or do you just load one of Sveasoft's firmware version right on there? Is there any version that is best for hacking? I want to do the power up grade and put a patch panel on my router.
    Thanks for the help,
    David
     
  2. viper54g

    viper54g Network Guru Member

    You can install custom (hacked) firmware on all WRT54G routers (V1.0 V1.1 and V2.0), there's no need for a security hole.

    You will probably only find V2.0 WRT54G routers now, I think they are the best because they have a faster processor (V2.0 has 200Mhz processor, V1.0 & V1.1 have only 125Mhz processor).
     
  3. dsheli

    dsheli Network Guru Member

    So if there is no need for a security hole then how did the hacking begin? How did people start writing there own firmware versions for the routers?
    Thanks for your help,
    David
     
  4. Toxic

    Toxic Administrator Staff Member

    Linksys allowed the source code to be downloaded due to the src being in under GPL license
     
  5. dsheli

    dsheli Network Guru Member

    Ok, thanks!
     
  6. badrottie

    badrottie Network Guru Member

    how about version 3?
     
  7. dosbox

    dosbox Network Guru Member

    It's in the very first sticky thread at the top of this forum

    link
     

Share This Page