I'm sure its been asked before.

Discussion in 'Cisco/Linksys Wireless Routers' started by Ryanium, Nov 18, 2008.

  1. Ryanium

    Ryanium Guest

    I have lag spikes in my wireless.

    I have a WRT54G v3 router latest firmware by linksys(4.21.1).
    When I plug up directly into the router, there is absolutely NO lag.
    I read that it was a Windows Problem, but it is not, seeing how my linux computers lag as well.
    These are some ping results:
    64 Bytes from 192.168.1.1: icmp_seq=330 ttl=64 time=3.42ms
    64 Bytes from 192.168.1.1: icmp_seq=331 ttl=64 time=2.88ms
    64 Bytes from 192.168.1.1: icmp_seq=332 ttl=64 time=2.16ms
    64 Bytes from 192.168.1.1: icmp_seq=333 ttl=64 time=1.20ms
    64 Bytes from 192.168.1.1: icmp_seq=334 ttl=64 time=3044ms
    64 Bytes from 192.168.1.1: icmp_seq=335 ttl=64 time=2049ms
    64 Bytes from 192.168.1.1: icmp_seq=336 ttl=64 time=1053ms
    64 Bytes from 192.168.1.1: icmp_seq=337 ttl=64 time=61.1ms
    64 Bytes from 192.168.1.1: icmp_seq=338 ttl=64 time=5.16ms

    Most people say its the card, I have 4 different cards, all doing the same thing. So I know its the router, but i'm a cheap-o in college.

    Any ideas?
     
  2. CaNsA

    CaNsA Network Guru Member

    Try DD-WRT, see if that helps any.

    CaNsA
     
  3. atinexus

    atinexus Network Guru Member

    What kind of devices are you useing G only?
    And how is your wireless configured? i.e. G only?

    My new WRT610N does the same thing once in a while... although not nearly that bad (69ms as apposed to my avg <1ms ping)...
    its a short vs long header plus no ack issue i think.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice