1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Increase Xmit Power wrt54gs v4

Discussion in 'Cisco/Linksys Wireless Routers' started by Agustinb, May 7, 2006.

  1. Agustinb

    Agustinb Network Guru Member

    Does any body know a firmware to increase the range of this router?

    (I found an excelent firmware for my WAP54 v.3. Its like the official but has the option increase "transmit power")

    Im using the wap54 as reapeater, but when I use DD-WRt on the wrt54gs they do not connect... thats why I need the offcial firmware with a light modifications...

    =)


    thks
     
  2. Toxic

    Toxic Administrator Staff Member

  3. Agustinb

    Agustinb Network Guru Member

    thks for the advice, but I tried DDWRT on my WRT5GS and my wap54g didnt work as repeater using that firmware on the router....
     
  4. BigDog_UMG

    BigDog_UMG Network Guru Member

    Lots of posts say that increasing power also increases noise AND it's a two way conversation. Increasing the routers power helps the laptop hear the router (with the increased noise), but, doesn't help the router hear the laptop -- it takes two.

    Most suggest hi-gain or focused antennas.
     

Share This Page