1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Installing Satori on WRT54G

Discussion in 'Sveasoft Firmware' started by cgrey, Apr 13, 2005.

  1. cgrey

    cgrey Network Guru Member

    I downloaded the zip file Firmware_Satori-4.0G and unzipped
    file Firmware_Satori-4_0G bin image file.
    Went to Administration/Firmware upgrade, browsed to the file, pressed
    upgrade and get
    UPGRADE ARE FAILED.

    So what do you think is wrong.
    The firmware verion before attemt of the WRT54G is
    Firmware Version: v3.03.6 as ship with the router.
     
  2. cgrey

    cgrey Network Guru Member

    Thanks for the reply
     
  3. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    What version of WRT54G do you have? Did you at least read this http://www.linksysinfo.org/modules.php?name=Forums&file=viewtopic&t=2463 as the v2.2 & v3.0 are not supported. If you have one that it does work for (lower than 2.2) than you can TFTP the file instead of the web interface method. Just you the linksys TFTP ftp://ftp.linksys.com/pub/network/tftp.exeftp://ftp.linksys.com/pub/network/tftp.exe. Also check that your bin file is valid and not corrupt. Download it again and try the new one to see.
     
  4. Couledouce

    Couledouce Network Guru Member

    Also use the wired connection when upgrading!
     
  5. genekhart

    genekhart Network Guru Member

    I'm having the same problem as original poster

    Has anyone been able to resolve this issue? I'm having the same problem as the original poster upgrading from 3.03.6 linksys firmware to satori 4g. thanks
     
  6. jagboy

    jagboy Network Guru Member

    genekhart
    what version router do you have
     
  7. genekhart

    genekhart Network Guru Member

    router version

    this is from SysInfo.htm

    Vendor:LINKSYS
    ModelName:WRT54G
    Firmware Version:v3.03.6 , Dec 29 2004
    #:000
    Boot Version:v3.4.2
    CodePattern:W54G
    Country:US

    RF Status:enabled
    RF Firmware Version:v3.03.6
    RF Domain:US (channel 1~11)
    RF Channel:6
    RF SSID:WRT54G

    -----Dynamic Information
    RF Mac Address:00:13:10:10:68:74
    LAN Mac Address:00:13:10:10:68:72
    WAN Mac Address:00:13:10:10:68:73
    Hardware Version:2.0

    Thanks
     
  8. jagboy

    jagboy Network Guru Member

  9. genekhart

    genekhart Network Guru Member

    Thanks you are right I don't know why they would do that but apparantly I have version 2.2. I guess I'll have to go figure out what firmware I should use then... Thanks
     
  10. jagboy

    jagboy Network Guru Member

    try dd-wrt on your router. first try dd-wrtv22 pre3.2 that one is great. i have a wrt54gv2.2 wit that firmware works great
     
  11. cgrey

    cgrey Network Guru Member

    Yes. Sotari doesn't support version 3.x
     
  12. jagboy

    jagboy Network Guru Member

    but dd-wrt i tink does. i have read threads about people that have flashed and it worked
     
  13. genekhart

    genekhart Network Guru Member

    does dd-wrt support pptp server? It doesn't appear to. That is one of the main features I need in my firmware (I had a USR8200 but it locks up alot), other features would be nice but not necessary. Any other suggestions? thanks
     
  14. jagboy

    jagboy Network Guru Member

    i am really not sure if it does support pptp server. try to pm brianslyer if it does.
     

Share This Page