1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

international and us version incompatibilities

Discussion in 'Cisco/Linksys Wireless Routers' started by frogger3d, Aug 26, 2004.

  1. frogger3d

    frogger3d Network Guru Member

    I have the international version of the WRT54G and after installing the latest US 2.04.4 version of the firmware I got lockups. The powerled started flashing even after resetting and the webserver was not accesible anymore. Before locking up pages started breaking off at the end.
    Recovering the firmware was very troublesome and fashing didn't work most of the time. I tried HyperWRT 1.3 twice, but it also locked up. Is this a known problem for the international versions of the WRT54G or is my unit possibly faulty?
     
  2. Toxic

    Toxic Administrator Staff Member

    Did you do a full reset after firmware upgrade? press reset for at least 20 seconds.
     
  3. frogger3d

    frogger3d Network Guru Member

    How many resets are there? I also heard about 10 seconds and about 30 seconds. Should I do 30 seconds to be sure?
     
  4. Esquire

    Esquire Mesquire Staff Member Member

  5. frogger3d

    frogger3d Network Guru Member

    I have the dutch version. Is it normal that after a firmware update the power led keeps flashing?
     
  6. frogger3d

    frogger3d Network Guru Member

    I just retried the HyperWRT firmware. I flashed it and pushed the reset button for 30 seconds. It came up, but only for a minute or so. It began flashing the power led shortly after that.
     
  7. Toxic

    Toxic Administrator Staff Member

    try turning the power off and back on again.
     
  8. frogger3d

    frogger3d Network Guru Member

    I tried that a couple of times. I also tried pushing the reset button 60 seconds, but nothing works. Well I'll just use the international firmware then... :(
     

Share This Page