1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

IPSec Tunnel from XP remote client to RV082..

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Nova5, Nov 5, 2006.

  1. Nova5

    Nova5 Guest

    I have setup a GroupVPN tunnel on the RV082, created an IPSec policy on the client, according to the "routerworld" page and assigned it... Nothin. Connection doesn't show as active on the RV, can't ping anything on that network.

    RouterWorld conf RV
    Routerworld IpSec Policy conf

    Of course i did modify it a bit to fit the needs of the local configuration. QuickVPN being a touchy program, and PP2P not being able to transfer Netbios names over are going to be troublesome. I have a client that needs a simple solution to connect two locations, I've got a pair of RV082's to link the two locations, the second need is a remote login from time to time for folks to work from home if needed. I suspect the current problem is more difficult than linking to two remote sites will be. Only the main site needs to accept remote clients, the annex would only need to access the main site. Everyone links to main, no other ways to go.
  2. Toxic

    Toxic Administrator Staff Member

    the ipsec XP config is flawed tbh i dont know anyone that has it working.

    try SSH sentinel and Client to Gateway mode.

Share This Page