iptables empty - V23 11/32 std

Discussion in 'DD-WRT Firmware' started by dellsweig, Nov 25, 2005.

  1. dellsweig

    dellsweig Network Guru Member

    Greetings

    I have been writing about IP logging failures for some time - since V23 went from alpha to beta.

    Bugtak usually just closes them out - unable to re-produce.

    Maybe someone here will see something..

    I have had V23 11/23 build up and running for a day. No problems. IP logging enabled - syslog messages going to log host.

    Today, I checked the dnsmasq box on the setup screen and saved settings. Router rebooted - when it came back up - no more IP logging


    BusyBox v1.01 (2005.11.18-11:12+0000) Built-in shell (ash)
    Enter 'help' for a list of built-in commands.

    ~ # iptables --list
    Chain INPUT (policy ACCEPT)
    target prot opt source destination

    Chain FORWARD (policy ACCEPT)
    target prot opt source destination

    Chain OUTPUT (policy ACCEPT)
    target prot opt source destination
    ~ # date
    Fri Nov 25 17:23:35 UTC 2005
    ~ # uname -a
    Linux yak 2.4.32 #181 Wed Nov 23 14:48:28 UTC 2005 mips unknown
    ~ # ping www.yahoo.com
    PING www.yahoo.akadns.net (216.109.117.106): 56 data bytes
    64 bytes from 216.109.117.106: icmp_seq=0 ttl=52 time=16.7 ms
    64 bytes from 216.109.117.106: icmp_seq=1 ttl=52 time=17.2 ms

    --- www.yahoo.akadns.net ping statistics ---
    2 packets transmitted, 2 packets received, 0% packet loss
    round-trip min/avg/max = 16.7/16.9/17.2 ms
    ~ # exit


    I did an 'iptables --list' and there are NO table entries

    Logging no longer functions and I assume no access restricitons or anything else based on the iptables is working

    Brainslayer - do you see the screen print?? Can you explain the empty IPtables??
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice