1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is it actually possible to access the GUI of a bridged modem?

Discussion in 'Networking Issues' started by m078, Feb 28, 2007.

  1. m078

    m078 LI Guru Member

    I'm using WRT54GL (running Tomato 1.02) with ADSL2MUE modem in bridged mode. This works extremely well, but I would like to access the modem's user interface.
    Is it actually possible to achieve this? If so, what firmware(s) do I need and is there a step by step guide?
    Or do I need to replace the ADSL2MUE?

    Thanks in advance.
    Martin
     
  2. h2oz7v

    h2oz7v LI Guru Member

    I dont think so. You have to reset the modem to be able to access the GUI again... but if anyone knows otherwise, please tell!
     
  3. davexnet

    davexnet LI Guru Member

    I think it sometimes works if you hard code a static IP
    in your PC tcp configuration in the correct subnet range.

    for example the modem uses 192.168.0.1, connect with 192.168.0.20
    with a subnet mask of 255.255.255.0

    - not sure if it will work if connected to a secondary router, but it
    should work if the pc is plugged directly into the modem.

    Dave
     

Share This Page